MONTH IN FM
JULY 2021 51
FMJ.CO.UK
LEGIONELLA CONTROL JUST
GOT A WHOLE LOT EASIER
Having trouble isolating water supply to
service TMVs? Are your isolation valves
seized or passing?
Over time isolation valves can become seized or
continue to pass water when fully closed, or there
may be no isolation at all in place. When any of these
situations arise, there are various options available:
Reach for the pipe freezing kit.
Call a pipe freezing specialist.
Call the local water authority
to isolate the mains supply.
Conduct a full system drain
down.
Go to the pub and leave it to
someone else.
But there is a much better,
cheaper, and quicker solution
developed by the innovative
team at Aladdin Products which
will stop flowing water in its tracks, isolating hot or
cold water in under 3 minutes, allowing completion
of works quickly and safely despite the potential
problems posed by lack of isolation. No more pipe
freezing, no more water authority callouts, no more
return visits, no more draining. Simply fit to the pipe,
isolate supply, and complete the task. The flow can
be reactivated, and the job completed in a fraction of
the time.
Aladdin EasyFit Isolator
The unique design of the Aladdin EasyFit Isolator
allows an isolation valve to be fitted externally to a live
pressurised pipe up to 85°c, using only an 18v cordless
drill and tools provided.
Aladdin EasyFit Isolators are not saddle valves – See
how they work at : https://aladdin-products.co.uk/
animations
Aladdin EasyFit Isolators o er a patented dual seal
technology, installing a full-flow quarter turn isolation
valve into a pressurised pipe in minutes, reducing
water damage, labour times and water wastage,
maintenance can be completed with
little or no disruption to other users.
Only isolate where works are to be
completed, maintenance which would
have ordinarily taken a full day can be
completed in no time.
Aladdin EasyFit Isolators are WRAS
approved
quarter
turn valves
which are
serviceable
and come
with a 10-year guarantee -
16 Bar rated.
Aladdin EasyFit Isolators
install on 15mm, 22mm
& 28mm copper and
plastic pipe (CU, PEX, PB, &
Hep2O).
Unsure which schedule of copper pipe you are
installing into, take that doubt away, use the NEW ½”
EasyFit Pro 15. The Aladdin EasyFit Isolator Pro 15
provides quick isolation of pre 1972 none schedule ½”
Cu pipes, suitable for both metric 15mm and 1/2”Cu
pipes internal or external applications.
Aladdin Autovent
Do your radiators and towel rails continuously require
deaerating? Prevent those unnecessary callouts,
Aladdin Autovents can be retrofitted to existing
radiators or installed on new installations to prevent
manual venting, no more removing covers to vent,
once fitted venting is completely automated.
Aladdin Autovents will:
Reduce system noise.
Save heating/energy costs and optimise radiator
e€ iciency.
Avoid costly engineer call out charges to purge
radiators.
No more manual venting of radiators.
Keep radiators hot to the top.
Stop gas in radiators thus reducing corrosion and
extending the life of heating components.
These fully
automatic
radiator
deaeration
valves are loved
by landlords,
homeowners,
and heating
engineers and
have a 5-year
guarantee.
Who are Aladdin Products?
Aladdin Products are developed and sold by NLB
Engineering Ltd which was formed in January 2002 to
commercially exploit the original range of automatic
radiator deaeration valves sold
under the trademark: Aladdin®
- the first and only failsafe
automatic radiator deaeration
valve.
Aladdin Autovents were further
developed with the secondgeneration
design enabling the
valve to be fitted to all radiators.
In 2013 Aladdin Products
launched the 15mm Aladdin
EasyFit Isolator, allowing for
isolation of hot or cold pressurised pipes.
Following further development, and the success of
the 15mm Aladdin EasyFit Isolator, came the 22mm
and 28mm versions.
Visit aladdin-products.co.uk for more
information on the Aladdin EasyFit Isolator and
the Aladdin Autovent.
www.aladdin-products.co.uk admin@nlbengineering.co.uk
/
/www.aladdin-products.co.uk
link
